KTM 60314910033 Manual Del Usuario página 13

14
34
35
14
36
- Route the cables on both sides toward the headlight as shown.
Ensure that the cables are not kinked or pinched.
- Mount the retaining plate (14) with the original screw (34).
- Mount the relay (35) of the wiring harness on the retaining plate (14).
- Plug in the connectors (36) of both fog lights with the appropriate con-
nectors on the wiring harness.
- Connect the wiring harness with ACC1 and ACC2 of the vehicle wiring har-
ness.
NOTE:
Connect the wires of the same color.
The cables are labeled with ACC1 or
ACC2.
ACC1+: Yellow-red
ACC1-: Brown
ACC2+: Black-red
ACC2-: Brown
Final steps
- Mount the headlight and the wind shield.
- Mount the turn signal, mask spoiler (23), and side trim (18).
13