Product Description And Specifications - Bosch PSS 200 A Manual Original

The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for dry sanding of wood, plastic,
metal, filler and varnished surfaces.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
Technical Data
Orbital sander
Article number
Rated power input
Orbital stroke rate preselection
No-load speed
No-load orbital stroke rate
Orbit diameter
Sanding sheet dimensions
– Hook-and-loop backing
– Clamping tension
Weight according to EPTA-Proced-
ure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/Vibration Information
Noise emission values determined according
to EN 62841-2-4.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 82 dB(A); sound power
level 93 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841-2-4:
2 2
a = 5.5 m/s , K = 1.5 m/s ,
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
Bosch Power Tools
(1) Orbital stroke rate preselection thumbwheel
(PSS 250 AE)
(2) On/off switch
(3) Dust box, complete (microfilter system)
(4) Clamps (PSS 200 AC/PSS 250 AE)
(5) Sanding plate
(6) Sanding sheet
(7) Handle (insulated gripping surface)
(8) Extraction outlet
(9) Filter element (microfilter system)
(10) Extraction hose
(11) Dust extraction adapter
(12) Punch
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
PSS 200 A
3 603 C40 0..
W 200
–
-1
min 12,000
-1
min 24,000
mm 2.0
mm 93 x 185
mm –
kg 1.6
/II
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
a)
a)
a)
PSS 200 AC
3 603 C40 1..
200
–
12,000 7000–12,000
24,000 14,000–24,000
2.0
–
93 x 230
1.6
/II
1 609 92A 67C | (12.03.2021)
English | 11
PSS 250 AE
3 603 C40 2..
250
●
2.0
93 x 185
93 x 230
1.6
/II