KTM 60112092180 Manual Del Usuario página 6

2
6
- Close the locking lever all the way by turning the key.
NOTE:
1
The detent must engage thoroughly. It should NOT be possible to swivel
the locking lever all the way up when the key has been removed and the
detent is folded back.
Play in locking lever:
With the detent folded back: 6 mm
With the detent engaged: 3 mm
This play has no impact on the access lock.
- Before inserting the device, check that the lock screw (1) is aligned with
the release on the power supply unit.
NOTE:
If not, correct the orientation of the power supply unit.
2
- After inserting the device, check that the rubber supports (2) are all in
contact.
NOTE:
If not, bend the tabs carefully by hand until the supports are in contact.
Check all screw connections after 50 km and tighten.
Regularly oil the lock and check for correct functioning.