Title Bar; Setting Area; Status Bar - ABB RVT Serie Instrucciones De Instalación Y De Funcionamiento

3.2.2

Title bar

At the left end of the title bar, the blue Mode button is used to switch between the three
RVT operating modes: Automatic mode, Manual mode and Set mode. The following
screen as shown in
is set to the RVT, for instance, the Set mode is set, the one-letter uppercase initial will be
indicated at bottom right of the screen: the
the current mode of the RVT is in Set mode.
In the middle of the title bar, the text, like the "Measurements" in the
current menu displaying in the screen.
By clicking the
to aid the operator to understand and set the parameters easily. Following screen will
appear after click the question mark on the
16 Easy start ç Manual Power Factor Controller RVT
Figure 14: RVT screen composition
Figure 15 appears when the Mode button is clicked. When one mode
Figure 15: RVT modes switching
question mark, a piece of relevant help information will display
Title bar

Setting area

Status bar

at the right end of the status bar means
Figure 15 screen:
Figure 14, displays