Uline Ohaus Adventurer H-5276 Manual Del Usuario página 12

A numeric input window is displayed. (See Figure 41)
Figure 41
Sinker Volume
1
4
7
Clear
Key in the desired value, then press SAVE. The display
returns to the previous screen with the new value
highlighted.
To return to the density determination home screen,
touch BACK.
Press START to start the process.
Step 1 of 2 – Weigh the Sinker in Air:
!
Follow the screen instructions, then
!
press ACCEPT to store the sinker weight
!
(in air). (See Figure 42)
!
!
!
!
Density Determination
Figure 42
Air Weight:
Liquid Weight:
Item
Settings
!
Step 2 of 2 – Weigh the Sinker
Submerged in the Test Liquid: Follow the
!
screen instructions, then press ACCEPT
!
to store the sinker weight (submerged in
liquid). (See Figure 43)
Density Determination
Figure 43
Air Weight:
Liquid Weight:
Item
Settings
PAGE 12 OF 54
OPERATION CONTINUED
10.0 ml
2 3
5 6
Save
8 9
Exit
0
•
Max 4200 g
Weigh sinker in air. Press Accept.
210.94
------ Sinker Volume:
------
Stop Accept
Max 4200 g
Weigh sinker in liquid. Press Accept.
249.94
421.44 g Sinker Volume:
------
Stop Accept
Once the necessary weights have been determined,
the density of the liquid sample is displayed in g/cm
(along with the weight in air, weight in water)
on the application screen.
Press START to reset all the weight values and restart the
process. (See Figure 44)
Figure 44
MEASURING THE DENSITY OF POROUS MATERIAL
USING OIL
To enable this feature, enter the density determination
Setup menu (See Figures 45-46), and set the following:
• Density Type: Solid
• Auxiliary Liquid Type: Water
• Porous Material: On
d=0.01 g
Figure 45
g
10.0 ml
Menu
Density Determination
d=0.01 g
Air Weight:
Liquid Weight:
Item
Settings
g
Figure 46
10.0 ml
Menu
Density Determination
17.1475
Air Weight: 421.44 g Sinker Volume:
Liquid Weight: 249.94 g
Item
Start
Settings
Density Determination
Density Type Auxilliary Liquid
Oil Density Print Settings
Back
Max 4200 g d=0.01 g
1.9984
g/cm3
421.44 g Water Temp.: 20.0º C
210.94 g Porous Material:
Start Menu
3
Max 4200 g d=0.01 g
g/cm3
10.0 ml
Menu
Water Temp. Porous Material
Exit
The DENSITY
DETERMINATION –
POROUS
home screen
Main Display Line
Reference Fields
Off
Function Buttons
0521 IH-5276