Dynamic Weighing; Density Determination - Uline Ohaus Adventurer H-5276 Manual Del Usuario

DYNAMIC WEIGHING

Use this application to weigh an unstable load, such as
a moving animal. Two different start/reset modes can
be selected: Manual (start and stop via key press) and
Automatic (start and stop automatically).
DYNAMIC WEIGHING – MANUAL (DEFAULT)
1. In the upper left portion of the home screen, select
Dynamic Weighing. (See Figure 26)
2. Place objects on the pan and press the START button.
Dynamic Weighing
Place sample on the pan. Press Start to begin averaging.
0.00
>0<
Gross: 0.00 g Averaging Time:
Tare: 0.00 g Automatic Mode:
Item
Start
Settings
Figure 26
3. The balance begins a countdown (averaging
process). During the countdown, the information line
displays the time remaining. If necessary, press STOP
to quit.
4. When the countdown ends, the result line is
displayed and held. Press CLEAR to clear the held
weight and return to the initial screen.
NOTE: Clear the pan before beginning a new
dynamic weighing cycle.
ITEM SETTINGS
To view or adjust the current settings, touch the
ITEM SETTINGS button. The Settings screen appears.
(See Figure 27)
Figure 27
Dynamic Weighing
Averaging Time
PAGE 9 OF 54
OPERATION CONTINUED
The DYNAMIC
Max 4200 g d=0.01 g
WEIGHING
home screen
Main Display Line
g
5 s
Reference Fields
Off
Application
Save to
Menu
USB
Buttons
Automatic Mode Sample Name
Back Exit
Averaging Time: Set the averaging time to a value
between 1 and 99 seconds. Default is 5 seconds.
Automatic Mode: When set to ON, the cycle begins
when an object is placed on the pan, and the held
value is automatically reset when the object is removed
from the pan. (See Figure 28)
Figure 28
Sample Name: Assign a name to the sample.
Print Settings: Change printing settings.
NOTE: The SAVE TO USB button will only appear
after a USB flash drive has been connected to
the balance. See page 6 for more information.
Use this application to determine an object's density.
(See Figure 29)
Four types of density determination can be made:
1. Solids more dense than water
2. Solid less dense than water
3. Liquid density
4. Porous material (impregnated with oil)

Density Determination

Air Weight:
Liquid Weight:
Item
Print Settings
Settings
Figure 29
Dynamic Weighing
Place sample on pan to begin averaging.
>0<
Gross: 0.00 g
Tare: 0.00 g
Item
Settings
DENSITY DETERMINATION
Max 4200 g d=0.01 g
0.0000
0.00 g Water Temp:
0.00 g Porous Material:
Start Menu
Max 4200 g d=0.01 g
0.00
g
Averaging Time: 5 s
Automatic Mode: On
Save to
Menu
USB
The DENSITY
DETERMINATION
home screen
Main Display Line
g/cm3
20.0º C
Reference Fields
Off
Function Buttons
0521 IH-5276