Initial Calibration - Uline Ohaus Adventurer H-5276 Manual Del Usuario

ENABLING UNITS OF MEASURE
Enter the weighing units sub-menu in the main menu to
activate the desired units of measure. This menu can
also be accessed by pressing the unit symbol in an
application home screen.
UNITS SUBMENU
Milligram
Pound
Tael (HK)
Custom Unit 1
NOTE: Only H-5276 converts to mg.
Use the Custom Unit to display weight in an alternative unit of measure.
The custom unit is defined using a conversion factor, where the conversion factor is the number of custom units per
gram expressed in scientific notation (Factor x 10^Exponent). The custom unit's name can be up to 3 characters.
For example: To display weight in troy ounces (0.03215075 troy ounces per gram), enter a factor of 0.3215075 and
an exponent of -1.
CALIBRATION
NOTE: The calibration unit is always in grams.
CAUTION! Do not disturb the balance during
any calibration.
CALIBRATION SUB-MENU
Span
Calibration Calibration
NOTE: H-5276, H-5278, H-5279 and H-6097 have
Span Calibration, Linearity Calibration and Cal Test.
PAGE 3 OF 54
OPERATION CONTINUED
Gram
Pennyweight
Tael (SG)
Linearity Cal
Test
Kilogram Carat
Grain Newton
Tael (TW) Tical

INITIAL CALIBRATION

When the balance is first installed, and when it is moved to
another location, it must be calibrated to ensure accurate
weighing results. The balance can be manually calibrated
with external masses. Have the appropriate calibration
masses available before beginning calibration.
ULINE
MODEL NO.
H-5276
H-5278
H-5279
H-6079
NOTE: Due to national laws, the balance may
not include some of the units of measure listed.
Ounce
Momme
Tola
NOTE: If Approved mode is on, some units will
not be displayed.
CALIBRATION WEIGHTS
OHAUS SPAN CAL
MODEL NO. POINTS (G)
0, 100, 200,
AX423/E
300, 400
0, 500,
AX1502/E
1,000, 1,500
0, 2,000, 4,000,
AX8201/E
6,000, 8,000
0, 200, 400, 800
AX822/E
Troy Ounce
Mesghal
Baht
LINEARITY CAL
POINTS (G)
0, 200, 400
0, 1,000, 1,500
0, 4,000, 8,000
0, 400, 800
0521 IH-5276