Uline Ohaus Adventurer H-5276 Manual Del Usuario página 7

ITEM SETTINGS CONTINUED
The next screen appears, with the message to place the
reference weight on the pan. (See Figure 17)
Figure 17
Parts Counting
Place reference weight on the pan. Press Accept to continue.
>0<
Gross:
Tare:
APW
0.010 g
Place the reference weight on the pan, then touch
ACCEPT to capture the value; the screen shows number
of pcs. (See Figure 18)
Figure 18
Parts Counting
Gross:
Tare:
Item
Settings
Establish an Average Piece Weight (APW): Each time a
new type of part is counted, the nominal weight of one
piece (APW) must be established using a small quantity
of pieces. This APW is stored until replaced by another
APW.
There are two methods to establish the APW value:
1. The actual APW is known.
2. The APW must be derived by weight. For this case
the current sample size will be used. (See Figure 19)
Figure 19
Parts Counting
Place reference weight on the pan. Press Accept to continue.
>0<
Gross:
Tare:
APW
0.010 g
PAGE 7 OF 54
OPERATION CONTINUED
Max 4200 g d=0.01 g
0.00
0.00 g APW:
0.00 g Sample Size:
Accept Back Exit
Max 4200 g d=0.01 g
20
70.19 g APW:
0.00 g Auto Optimization:
Sample Save to
Menu
Name USB
Max 4200 g d=0.01 g
0.00
0.00 g APW:
0.00 g Sample Size:
Accept Back Exit
Set a Known Average Piece Weight (APW): To adjust the
APW value directly, touch the APW button. A numeric
input window appears. (See Figure 20)
Figure 20
g
0.010 g
10
Key in the desired APW Weight, then press SAVE.
The display returns to the application home screen with
the new APW value in the reference field. (See Figure 19)
Set a New Average Piece Weight (APW) – Derived: To
establish a new APW, place the reference weight on the
pan and press ACCEPT to continue. (See Figure 21)
Figure 21
PCS
3.510 g
Off
NOTE: The sample size that is displayed will be
used. To use a different sample size, change
that first. (See Figure 21)
The home screen shows the number of pieces at the
new APW. (See Figure 22)
Figure 22
g
0.010 g
10
APW
1 2 3
4 5 6
7 8 9
Clear 0
•
Parts Counting
Place reference weight on the pan. Press Accept to continue.
0.00
>0<
Gross: 0.00 g APW:
Tare: 0.00 g Sample Size:
APW
Accept
0.010 g
Parts Counting
Gross: 179.75 g APW:
Tare: 0.00 g Auto Optimization:
Item Sample Save to
Settings Name
0.010 g
Save
Exit
Max 4200 g d=0.01 g
g
0.010 g
10
Back Exit
Max 4200 g d=0.01 g
20
PCS
8.987 g
Off
Menu
USB
0521 IH-5276