Basic Installation And Connections; System Requirements; Attaching The Clamp Filters - Sony SNC-RZ30N Manual De Instalación

Basic Installation and Connections

B
System
Requirements
Processor
Pentium III 500 MHz or higher (Pentium 4,
1 GHz or higher recommended)
RAM
128 MB or more
OS
Windows 98/ 98SE/ Me/ NT4.0/ 2000/ XP
Web browser
Internet Explorer Ver. 5.5 or Ver. 6.0
Netscape Navigator Ver. 6.2x
Attaching the Clamp
Filters
Before using the camera, attach the supplied
clamp filters to the AC power adaptor cable
and AC power cord, as shown below.
Notes
• Be careful not to clamp the cable between
the pawls of the clamp filter.
• Be sure to attach the clamp filters as close
as possible to the AC power adaptor and
AC power cord ends. The clamp filters
will not be effective unless they are
immediately adjacent to the cable ends.
Attach the clamp filter to the plug end
of the AC power adaptor cable.
Attach the clamp filter to the AC
power adaptor end of the AC power
cord.
System Requirements/Attaching the Clamp Filters
11
GB