Installing On The Ceiling - Sony SNC-RZ30N Manual De Instalación

Installing on the Ceiling

You can install the camera to a junction box
pre-installed on the ceiling using the
supplied ceiling brackets, wire rope and
screws.
1
Mount the ceiling bracket (A) to
the bottom of the camera using
the supplied four screws (+PSW
3 × 6).
Hook the projection on the bracket to the
hole on the camera.
+PSW 3 × 6 (supplied)
Hook the
projection
to the hole.
16
GB
Installing the Camera
2
Secure the wire rope to the
junction box on the ceiling.
Use a screw to match the screw hole of
your junction box (not supplied).