Location And Functions Of Parts And Controls - Sony SNC-RZ30N Manual De Instalación

Location and
Functions of Parts
and Controls
Front
1 2
1 NETWORK indicator (orange/
green)
The indicator flashes in orange when the
camera is connected to the 10BASE-T
network; it flashes in green when the
camera is connected to the 100BASE-
TX network.
The indicator goes off when the camera
is not connected to the network.
2 Lens
A × 25 optical zoom, auto-focus lens is
mounted as standard equipment.
8
GB

Location and Functions of Parts and Controls

3 4 5
3 POWER indicator (green)
When the power is supplied to the
camera, the camera starts checking the
system. If the system is normal, this
indicator lights up.
If a system error occurs, this indicator
flashes every second. In this case,
consult your authorized Sony dealer.
4 PC card slots
Insert the recommended ATA memory
card ("Memory Stick" in the PC card
adaptor) into each slot.
The dummy cards are inserted at the
factory. Remove the dummy card when
you use the slot.
Note
Insert the PC card with its front side
towards the NETWORK and POWER
indicators.
5 PC card levers
Press the lever to remove the PC card
from the camera.