Kit Preparation - Metra 95-8244HG Instrucciones De Instalación

1. Attach the Passenger Air Bag Light
board to the radio housing with the
factory hardware. (Figure A)
2. Attach the Passenger Air Bag Light
board cover to the radio housing panel
over the Passenger Air Bag Light board
using (3) of the #4 x 3/8" Phillips screws
supplied. (Figure A)
3. Apply the supplied Air Bag Sticker to the
face of the radio housing. (Figure A)
4. Attach the panel clip and screw mount
to the radio housing using the factory
hardware. (Figure B)
5. Attach the (2) panel clip mounts to the
radio housing using (4) #4 x 3/8" Phillips
screws supplied. (Figure B)
6. Attach the clips removed in step 7 of
disassembly to the panel clip mounts on
the radio housing.
7. Attach the climate control and the
chrome trim to the radio housing.
Continue to Kit Assembly
6

KIT PREPARATION

(Figure A)
Step 3
(Figure B)
Air Bag Sticker
Step 4
1.800.221.0932
|
MetraOnline.com