Kit Assembly - Metra 95-8244HG Instrucciones De Instalación

ISO DDIN radio provision
1. Secure the radio brackets to the radio
with the screws supplied with the radio.
(Figure A)
2. Secure the radio/bracket assembly
to the radio housing/climate control
assembly with the factory hardware.
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to the
radio. Metra recommends using the proper
mating adapter from Metra and/or AXXESS.
Test the radio for proper operation .
4. Reassemble the dash in reverse order of
disassembly.

KIT ASSEMBLY

(Figure A)
7
REV. 11/6/2017 INST95-8244HG