Preventing The Torch Body From Being Changed - Fronius TTB 80 G Manual De Instrucciones

12
IMPORTANT! When installing the torch body, ensure that it is pushed all the way in and
snaps into place.
14
15
16
17
Preventing the
1
torch body from
being changed
180°
2
1
Connect the power source to the grid and switch on
Press the gas-test button on the power source
Shielding gas flows out for 30 s.
Check the coolant flow:
you must be able to see a strong return flow into the coolant container.
Perform a test weld and check the quality of the weld seam
1
13
59