Articulated Torch Bodies; General; Assembling And Setting Up Articulated Torch Body - Fronius TTB 80 G Manual De Instrucciones

Articulated torch bodies

General

Assembling and The articulated torch body is assembled in the same way as a conventional torch body
setting up articu- (see page 52).
lated torch body
1
64
The articulated torch bodies can be indivi-
dually adapted to a wide variety of situa-
tions and applications, for example in the
case of restricted part accessibility or diffi-
cult welding positions.
Due to the articulated joint, the welder's
hand is closer to the torch handle and thus
to the torch triggers.
With the articulated welding torches, no
+/- 360°
material weakening occurs during setup.
IMPORTANT! When setting up the articu-
lated torch body, only unscrew the front
part until the desired working position is
reached, but no more than one turn!
If the front part is unscrewed more than
one turn:
-
max. 1
-
the welding torch can wear out faster
the welding torch may heat up consi-
derably during operation