Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TABLE OF CONTENTS
INTRODUCTION
Receiving and Uncrating . . . . . . . . . . . . . . . . . . . .2
How to Order Replacement Parts . . . . . . . . . . . . .2
Installation Safety Precautions . . . . . . . . . . . . . . .3
Operation Safety Precautions . . . . . . . . . . . . . . . .3
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Support Installation . . . . . . . . . . . . . . . . . . . . . . . .4
Electrical Equipment . . . . . . . . . . . . . . . . . . . . . . .4
Belt Installation . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Take-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 5
Intermediate Assembly Installation . . . . . . . . . . . .5
Torque Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Gearmotor Mounting Options . . . . . . . . . . . . . . . .6
Gearbox Positions . . . . . . . . . . . . . . . . . . . . . . . . .6
Conveyor Start-Up. . . . . . . . . . . . . . . . . . . . . . . . .7
Belt Tracking . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . .8
Maintenance Checklist . . . . . . . . . . . . Back Cover
REPLACEMENT PARTS
Common HSS Unit BOM. . . . . . . . . . . . . . . . . . . .9
Tail Assembly Drawing & List . . . . . . . . . . . . . . . .9
Bed Gauge Identification.. . . . . . . . . . . . . . . . . . .10
Center Drive Assembly & List . . . . . . . . . . . . . . .11
End Drive Assembly & List . . . . . . . . . . . . . . . . .12
Spanish Version . . . . . . . . . . . . . . . . . . 13
INTRODUCTION
This manual provides guidelines and procedures for installing,
operating, and maintaining your conveyor. A complete parts list
is provided with recommended spare parts highlighted in gray.
Important safety information is also provided throughout the manual.
For safety to personnel and for proper operation of your conveyor, it
is recommended that you read and follow the instructions provided
in this manual.
• Receiving and Uncrating
1. Check the number of items received against the bill of lading.
2. Examine condition of equipment to determine if any
damageoccurred during shipment.
3. Move all crates to area of installation.
4. Remove crating and check for optional equipment that may be
fastened to the conveyor. Make sure these parts (or any foreign
pieces) are removed.
NOTE: If damage has occurred or freight is missing,
Contact your Hytrol Integration Partner.
• How to Order Replacement Parts
Included in this manual are parts drawings with complete replacement
parts lists. Minor fasteners, such as nuts and bolts, are not included.
When ordering replacement parts:
1. Contact Dealer from whom conveyor was purchased or nearest
HYTROL Integration Partner.
2. Give Conveyor Model Number and Serial Number or HYTROL
Factory Order Number.
3. Give complete description from Parts List.
4. Give type of drive. Example-8" End Drive, 8" Center Drive, etc.
5. If you are in a breakdown situation, tell us.
Hytrol Conveyor
Company, Inc.
JONESBORO, ARKANSAS
SERIAL #
HYTROL Serial Number
(Located near Drive on Powered Models).
2
QR
CODE
YEAR
123456
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
