Kuppersbusch B6335.0 Instrucciones De Uso página 28

IMPORTANT
The duration of this cycle cannot be
changed. To stop the cycle before it is fin-
ished, turn the control dial to the
tion.
5. When the cycle is finished, the oven will turn
itself off, an alarm will sound and the
symbol will flash quickly.
IMPORTANT
Do not open the oven door until the Öko-
Clean function is complete.
®
The cooling cycle is necessary for the func-
tion to work properly.
28
User's Guide
6. Touch any sensor with your fingertip to stop
the alarm and turn off the
7. Turn the control dial to the
8. Any traces of dirt and excess water can now
posi-
be removed from the oven with the damp
cloth.
The ÖkoClean
temperature. However, cooling times can vary
depending on the room temperature.
Before touching the inside surface of the
oven, make sure that it has cooled properly.
If a deeper clean is required after using the
ÖkoClean
and non-abrasive sponges.
function takes place at a low
®
WARNING
function, use neutral detergents
®
symbol.
position.