Siemens SINUMERIK 840D sl Manual De Puesta En Servicio página 124

Diagnóstico
8.1 Registrador de acciones
Adapter -- length 1 0.000
Adapter -- length 2 0.000
Adapter -- length 3 0.000
Relief angle 0.000
Manual Turn: Cutting rate 0.000
Transformation active:
Active toolholder 0
Active G-Codes: G01 STARTFIFO G17 G40 G500 G60 G601 G71 G90 G94
CFC NORM G450 BNAT ENAT BRISK CUT2D CDOF FFWOF ORIWKS RMI ORIC
WALIMON DIAMOF COMPOF G810 G820 FTOCOF OSOF SPOF PDELAYON
FNORM SPIF1 CPRECOF CUTCONOF LFOF TCOABS G140 G340 SPATH LFTXT
G290 G462 CP ORIEULER ORIVECT PAROTOF TOROTOF ORIROTA RTLION
TOWSTD FENDNORM RELIEVEON DYNNORM WALCS0
Active M-Codes:
--- 04.10.2006 09:24:57 HMI-Emb 0 CH_STATE_CHANGED
Channel State of Channel 1 changed to active
--- 04.10.2006 09:24:57 HMI-Emb 0 OPEN_WINDOW
Window opened: "Machine configuration" (Id 13392, Appl. 6)
--- 04.10.2006 09:24:57 HMI-Emb 0 CLOSE_WINDOW
Window closed: "Dummy-Window" (Id 20005, Appl. 1)
--- 04.10.2006 09:24:57 HMI-Emb 0 CLOSE_WINDOW
Window closed: "Position - Work" (Id 20040, Appl. 1)
--- 04.10.2006 09:24:57 HMI-Emb 0 CLOSE_WINDOW
Window closed: "Transformation/G functions" (Id 20220, Appl. 1)
--- 04.10.2006 09:24:57 HMI-Emb 0 CLOSE_WINDOW
Window closed: "Feedrate" (Id 20280, Appl. 1)
--- 04.10.2006 09:24:56 HMI-Emb 0 CLOSE_WINDOW
Window closed: "Tool" (Id 20300, Appl. 1)
--- 04.10.2006 09:24:56 HMI-Emb 0 CLOSE_WINDOW
Window closed: "Actual block" (Id 20190, Appl. 1)
--- 04.10.2006 09:24:56 HMI-Emb 0 CLOSE_WINDOW
Window closed: "Dummy-Window" (Id 21010, Appl. 1)
--- 04.10.2006 09:24:56 HMI-Emb 0 CLOSE_WINDOW
Window closed: "Dummy-Window" (Id 1000, Appl. 1)
--- 04.10.2006 09:24:56 HMI-Emb 0 KEY_PRESSED
Key pressed: KEY_F6 (RELEASED) (e0/40)
--- 04.10.2006 09:24:56 HMI-Emb 0 KEY_PRESSED
Key pressed: KEY_F6 ( 0/40)
--- 04.10.2006 09:24:53 <default> 0 ALARM_QUIT
Alarm quit: 100014
--- 04.10.2006 09:24:53 HMI-Emb 0 OPEN_WINDOW
Window opened: "Dummy-Window" (Id 1000, Appl. 1)
--- 04.10.2006 09:24:53 HMI-Emb 0 CLOSE_WINDOW
Window closed: "Notebooks screen" (Id 5421, Appl. 1)
--- 04.10.2006 09:24:53 HMI-Emb 0 KEY_PRESSED
Key pressed: KEY_SELECT_MODE ( 0/44)
--- 04.10.2006 09:24:51 <default> 0 ALARM
NCK-Alarm: 8080, cleartype Alarm-Cancel
7 option(s) is/are activated without setting the license key
--- 04.10.2006 09:24:50 HMI-Emb 0 KEY_PRESSED
Key pressed: KEY_F5 (RELEASED) (e0/3f)
118
Puesta en marcha de HMI Embedded sl
Manual de puesta en servicio, 11/2006, 6FC5397-8CP10-0EA0