Parker Controller Family Manual De Uso página 92

Deleting the minimum and maximum values in memory.
rES
YES = yes, clear memory now
no = no; do not clear memory now
Programming switching output 2 as the error output.
Err
YES = yes
no = no
Indicate software version
SVn
Set the placing of the decimal point (the maximum number of
dPP
decimal places is therefore independent from the nominal de-
vice pressure).
0000 = no decimal place
000.0 = one decimal place
00.00 = two decimal places
0.000 = three decimal places
The end of programming mode.
End
92