Intended Use - Hilti PM 40-MG Manual De Instrucciones Original

3 Description
3.1 Product overview
3.2

Intended use

This tool is a self-leveling multi-line laser level that allows a single person to transfer right angles, level
horizontally, carry out alignment work and plumb accurately.
The tool has three green laser lines (one horizontal and two vertical), a reference point below the tool as well
as four beam intersection points (front, back, left, right and above) with a range of approx. 20 m. Range
depends on the brightness of ambient light.
The tool is designed for mainly indoor use and is no substitute for a rotating laser level. For outdoor use
make sure that the boundary conditions are the same as for indoor use, or else use a Hilti laser receiver.
Possible applications are:
• Marking the position of partition walls (at right angles and in the vertical plane).
• Checking and transferring right angles.
• Aligning components to be installed or sections of a structure in three axes.
• Transferring points marked on the floor to the ceiling.
The laser lines can be switched on either separately (vertical or horizontal line only) or together. When used
with inclination angle, the pendulum for automatic leveling is blocked.
▶ Use only Hilti B12 2.6 Li-ion batteries with this tool.
▶ Use only Hilti battery chargers of the C4/12 series for charging these batteries.
3.3 Features
The tool levels itself automatically within a range of approx. 3.0°. If this is not sufficient, the tool can be
leveled using the adjustable feet and circular bubble level. Self-leveling takes only about 3 seconds.
When the self-leveling range is exceeded, the laser beams blink as a warning.
When switched on initially, the tool is in standard mode, i.e. visible beam mode with high line brightness.
When the selector button for line and receiver mode is pressed and held for a short time the tool switches to
14 English
1
Adjustable foot
@
Li­ion battery
;
Warning sticker
=
Selector button for line and receiver mode
%
Laser exit window
&
Rotary on/off and pendulum lock switch
(
Fine adjustment for rotation platform
)
Circular bubble level
+
2171411
*2171411*