Commissioning; 4�1 Setup Recommendations; 4�2 Wall Mounting - Renfert Twister Manual De Instrucciones

3.3 Accessories
1821-0102 Stand for benchtop device
EN
1821-0200 Mixing spatula
1820-6500 Bowl incl� blunger, 65 ml
1820-6520 Bowl, 65 ml
1820-0200 Bowl incl� blunger, 200 ml
1820-0220 Bowl, 200 ml
1820-0500 Bowl incl� blunger, 500 ml
1820-0520 Bowl, 500 ml
1820-0700 Bowl incl� blunger, 700 ml
1820-0720 Bowl, 700 ml
1820-1001 Bowl incl� blunger, 1000 ml
1820-1020 Bowl, 1000 ml
1823-0500 Alginate Mixing bowl 500 ml, incl� paddle
2929-0000 Filter pressure regulator
4

Commissioning

4.1 Setup Recommendations
Operate the appliance at room temperature 15 - 30 ºC [59 – 86 ºF]�
When setting up the appliance, please note the following:
• Do not place the appliance under a heat source�
• Do not place the appliance in front of open windows�
• Do not set the appliance up where it will be subjected to direct sunlight�
• Do not subject the appliance to high humidity�
4.2 Wall Mounting
Please have the following items on hand:
• pencil,
• drill template,
• Phillips head screwdriver,
• drill
• drill bit 8 mm [5/16th inch] - appropriate for the wall material�
Make sure the wall on which you intend to mount the device is capable of bearing its weight!
Please ensure that there are no electric cables or water pipes running through the wall at the
place of installation!
⇒ Establish optimum working height�
⇒ Align the drill template and mark the drill holes�
⇒ Drill the required holes >>> depth at least 55 mm [2�2 inch]�
⇒ Insert the dowels�
⇒ Screw the top screws into the dowels� Allow the screws to protrude
9 - 10 mm [0�35 - 0�4 inch]�
⇒ Screw the lower mounting bracket into place�
⇒ Hang the appliance on the wall�
⇒ Secure the device by tightening the knurled nut (9, Fig� 3)�
Tighten the knurled nut securely.
W x H x D: 227 x 622 x 294 mm [8�937 x 24�488 x 11�575 inch]
- 6 -
Fig. 2