Operating Instructions; Setup And Commissioning; Benchtop Unit; Wall Mounting - Renfert SYMPRESS Instrucciones Para El Servicio

Tabla de contenido

Idiomas disponibles

The unit complies with current EU direc-

tives (see section H).

Other symbols are explained as they occur.

1. Setup and

Commissioning

The SYMPRESS can be used as a benchtop unit, al-

though it is also suitable for wall mounting.

1.1 Benchtop Unit

Select a stable underlay on which to set the unit up.

1.2 Wall Mounting

With the aid of the wall mounting kit (refer to the ac-

cessories), the SYMPRESS can be securely mounted

on a wall.

The mounting instructions are included in the mount-

ing kit.

1.3 Setup Recommendations

Operate the unit at room temperature

18 - 24ºC [64 – 75.2ºF].

When setting up the unit, please note the following:

• Do not place the unit under a heat source.

• Do not place the unit in front of open windows.

• Do not set the unit up where it will be subjected to

direct sunlight.

• Do not subject the unit to high humidity.

1.4 Connection and Starting

Before connecting the unit to the wall out-

let, make sure the voltage information on

the nameplate corresponds to your local

power supply.

• Connect the provided power cord to the mains con-

nection socket (Fig. 1).

• Plug the power cord into the wall outlet.

• Switch the unit on at the main power switch

(A, Fig. 2).