Adjustment Of Throttle Cable; Adjustment Of Carburetor - Serpento DEFENDER Manual De Usuario Y Mantenimiento

Adjustment of Throttle Cable

Make sure that the adjusting and lock nuts of the throttle cable work normally.
Check if the throttle twist grip is with the required free operating movement.
The required free operating movement: 2-6mmif the grip can not be so moved frely, turn the adjusting nut to ensrure it.
*After adjustment, start the engine and check for the free operating movement again.Repeat the adjustment if necessary untio it is as required.

Adjustment of Carburetor

The adjusting procedures of idling speed:
1. Support the vehicle by a stand.
2, Adjust the idling speed by the throttle stop screw (1) to 1500 ± ISOrpm.
Caution:
Do not try to cover up any trouble of other parts of the carburetor by adjusting the idling speed. In case of any abnormality with the carburetor,
it has to be rmoved by Service Center.
Adjustment of idling speed shall be made only when the cold engine is warmed up or 10 minutes after the motorcycle is stopped from driving.
Idling speed
adjusting
screw
• DEFENDER
MANUAL DEL USUARIO
33