Adjustment Of Throttle Cable; Adjustment Of Carburetor - Serpento SPIRIT 250 Manual De Usuario

Adjustment of Throttle cable

Make sure that the adjusting nut of the throttle cable works normally.
Check to see if the throttle twist grip is with the required free operating movement.
The required free operating movement:2-6mm.
If the grip can not be so moved freely, turn the adjusting nut to ensure it.
*After adjustment, start the engine and check for the free operating movement again,
repeat the adjustment if necessary until it is as required.

Adjustment of Carburetor

Caution:
The idling speed adjustment of the engine should be carried out with a hot engine.
Set the idling speed to the required value by the help of the idling speed adjusting screw
with the vehicle standing on a flat ground.
The required idling speed: 1500r/min.
MANUAL DEL USUARIO
Adjusting nut
Idling speed
adjusting screw
• SPIRIT 250
Locking nut
21