General Safety Information - Parker SCLV Manual De Instrucciones

Safety Information
2�3 General Safety Information
Always observe all the relevant national regulations regarding accident prevention
and industrial safety when completing any work!
Never turn the forward converter (& "Installation Example" on Page 58) or
unscrew it from the housing!
Observe the IP protection rating when using the hydraulic tester in wet areas!
& "Technical Data" on Page 68
Only allow the hydraulic tester to be connected by properly skilled technical
personnel!
Observe the prescribed tightening torques!
Avoid exposing the hydraulic tester to any forms of force!
Never use a hydraulic tester when it is damaged or defective!
Never use any types of fluid other than those approved! & "Technical Data" on
Page 68
V1.0/04/14
50