Technical Data - Dräger X-plore 8000 Instrucciones De Uso

8 Disposal
The life span of the facepieces is 3 years if they are used and
maintained as described in these instructions for use. The life
span of the visor depends on the type of strain. Extreme
operating conditions can shorten the life span.
Dispose of the product in accordance with applicable
regulations.
9

Technical data

Suitable for head size
Ambient conditions
Operating temperature
Storage temperature
Relative humidity
Material
Headband
Comfortable padding
Sweatband
Hard foam shell
Sealing cuff
Helmet trim
Helmet visor
Hood visor
Weights
Dräger X-plore 8000 helmet
with visor
Dräger X-plore 8000 chin trim
®
(Zytec )
Dräger X-plore 8000 neck
®
trim (Zytec )
Dräger X-plore 8000 shoul-
®
der trim (Zytec )
Dräger X-plore 8000 neck
®
trim (Tychem 4000)
Dräger X-plore 8000 shoul-
®
der trim (Tychem 4000)
Dräger X-plore 8000 helmet
Dräger X-plore 8000 bump
cap
Dräger X-plore 8000 hood for
®
helmet (Tychem 2000)
Dräger X-plore 8000 hood for
®
helmet (Tychem 4000)
Instructions for use |
Dräger X-plore 8000 Facepieces
52 cm to 60.6 cm
-5 °C to +50 °C
-10 °C to +45 °C
<90 %
MDPE (polyethylene)
Foam with elastane
Foam
Polystyrene
Cotton
® ®
Zytec or Tychem 2000 or
®
Tychem 4000
Polycarbonate
PETG (polyethylene tere-
phthalate)
857 g
85 g
155 g
295 g
105 g
140 g
605 g
490 g
205 g
295 g
Dimensions
Dräger X-plore 8000 helmet
with visor
Dräger X-plore 8000 helmet
for hood
Dräger X-plore 8000 bump
cap for hood
Dräger X-plore 8000 helmet
with visor with chin trim
Dräger X-plore 8000 helmet
with visor with neck trim
Dräger X-plore 8000 helmet
with visor with shoulder trim
Dräger X-plore 8000 hood for
helmet
|
Disposal
360 mm x 230 mm x 305 mm
345 mm x 237 mm x 305 mm
345 mm x 237 mm x 305 mm
360 mm x 230 mm x 360 mm
360 mm x 230 mm x 400 mm
550 mm x 550 mm x 500 mm
570 mm x 550 mm x 700 mm
en
19