Cleaning And Maintenance - Domo DO-324A Manual Del Usuario

DO-324A
- Move the unit over to a place where you can easily drain the water.
- Remove the drain plug at the bottom of your unit and drain the water.
- After fully draining the water tank, place the drain plug back on the drain
opening.
- Restart the unit, make sure the error code P1 is no longer displayed. When
the code doesn't disappear, try turning off and on the unit a few times. When
the error code continues, please contact the after sales service.
NOTE : always make sure to install the drain plug, before turning the unit back
on.

CLEANING AND MAINTENANCE

Important :
- Always remove the plug from the socket before
cleaning the unit.
- Never use any chemical or abrasive products to
clean the unit.
- Never clean the unit with water or any other liquid,
this can cause electrocution.
- When the power cord is damaged it must be re-
paired or replaced by the after sales surface of the
manufacturer or by a qualified person.
1. Air filter
Clean the air filter at least ever 2 weeks. To make
-
sure the airco can operate in optimal conditions.
This appliance has 2 filters. Remove both filters by follow the arrows on the
-
back of the unit.
Clean the air filters in lukewarm water with a bit of detergent. Rinse the fil-
-
ters thoroughly and let them dry.
Make sure the filters are completely dry before placing the back in to the
-
airco.
NOTE : the grill and filter are attached to one another, but can be taken apart.
2. Airco body
Use a damp, soft cloth and a bit of mild detergent, to clean the outside of the
unit. Make sure the unit is thoroughly dried afterwards.
3. Storing
Before storing the unit for a longer periode of time, please follow the next
steps :
- Drain all the water from the appliance.
- Afterwards turn on the unit in the "fan" mode for half a day. Make sure the
unit is placed in a heated room. This will dry the unit completely and previent
62
1
2