Combined Timer - Domo DO-324A Manual Del Usuario

DO-324A
DRY mode
Make sure the unit is plugged in.
Press the "mode"button to select the "dry" function.
Use the arrow buttons to set the desired temperature.
Press the "on/off" button to turn on the airco.
TIMER ON function
Make sure the unit is plugged in.
Press the "timer on"button. The display will show the last setting of the "timer on"
mode. Press the "timer on" button again to start setting the delay time you want to
airco to start working. Every time you press the timer the delay time will change. Max.
delay timer setting is 24 hours.
After setting the timer, it takes about 2 sec. Before the set temperature will be
displayed again.
TIMER OFF function
Press the "timer off"button. The display will show the last setting of the "timer off"
mode. Press the "timer off" button again to start setting the delay time you want the
airco to stop working. Every time you press the timer the delay time will change. Max
to set delay time is 24 hours. After setting the timer, it takes about 2 sec. Before the set
temperature will be displayed again.

COMBINED TIMER

This setting can be used to let the airco start at a certain time and stop at a different
time.
1. Automatic off-on
a.
b. Press the "timer off" button again and set the desired delay time, you
c.
d. Press the "timer on" button again and set the desired delay time, you
e.
NOTE : make sure that the set "off" time is urlier than the "on" time.
2. Automatic on-off
a.
b. Press the "timer on" button again and set the desired delay time, you
c.
d. Press the "timer off" button agian and set the desired delay time, you
e.
Press the "timer off" buton.
want the airco to stop working.
Press the "timer on" button
want the airco to start working.
Wait until the display shows the set temperature again.
Press the "timer on" button
want the airco to start working.
Press the "timer off" button
want the airco to stop working.
Wait unit the display shows the set temperature again.
66