Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
English
CONTROLS
The following alternatives for controlling the unit
for residential ventilation are available:
•
through standard integrated display control
•
through T-EP remote control accessory (OP-
TIONAL)
INTEGRATED DISPLAY CONTROLLER
• COMMISSIONING
After installation and when the machine is pow-
ered, the on-board display is switched on.
The code "F130" or "F150" will appear on the
display. The unit is ready for use.
• MAIN MENU OVERVIEW
To
select
a
scroll through the menu list by pressing the keys
"+" or "-" up to the required menu.
To activate the required menu, press ENTER.
To change the setting of the required parameter,
press ENTER.
The settings can then be changed to the required
value using "+" or "-" .
To save the new setting, press ENTER.
If no button is pressed for one minute, the display
will automatically go back to the main menu and
the display will go into stand-by (screen off ).
The following page shows an overview of the
available functions and settings.
74
setting
or
function,
ENY-SHP-130
F130
ENY-SHP-150
F150
F130
Publicidad
Tabla de contenido
