Energy SHP-130 Instrucciones Para La Instalación, El Uso Y El Mantenimiento página 97

dgto dgto
• " " DIGITAL OUTPUT SIGNAL
CONFIGURATION
There are three configurations available for man-
aging
the digital output signal:
• "COnS" function (default) - Digital ON/OFF ena-
bling signal
• "Post" function - Post Treatment with Hydronic
coil
• "PrE" function - Antifreeze Pre Treatment with
Hydronic coil
From the main menu, access the "SEt" menu and
use the TOUCH PAD to display the "DGto" menu.
Press the "Enter" key to confirm.
Use the TOUCH PAD to choose the COnS, Post
or PrE function.
Confirm the selected function with the "Enter" key.
ENTER
• SERIAL PORT RS485-A DATA
TRANSMISSION
SPEED CONFIGURATION
Depending on the specifications of the Mod-
bus supervision system that interfaces with the
electronic board, there are two different config-
urations available for setting the data exchange
speed via serial port RS485-A:
• "Std" (default) - 9600 bps
• "UP" - 38400 bps
From the main menu, access the "SEt" menu and
use the TOUCH PAD to display the "Nbsp" menu.
Press the "Enter" key to confirm.
Use the TOUCH PAD to choose either the Std or
UP function.
Confirm the selected function with the "Enter" key.
ENTER
ENTER
ENTER
ENTER
English
ENTER
ENTER
97