Energy SHP-130 Instrucciones Para La Instalación, El Uso Y El Mantenimiento página 81

• "PAR" PARAMETERS MENU
PAr
ENTER
Table 1
PAr
" "
qLO
qHI
Maximum flow rate that can be set in calibration
nLO
nHI
tbSt
TCOL (*) Heating setpoint temperature for freecooling management
THEA (*)
Test (*)
Tinv (*)
RHnS Number of samples to calculate dynamic humidity setpoint
Relative humidity for activating
HrLO
Hrst
ErHS
(*) Parameters available only if the "
VlO
VHI
DESCRIPTION
Minimum flow rate that can be set in calibration
Minimum rpm in operation
Maximum rpm in operation
BOOSTER duration time
Cooling setpoint temperature
Summer season transition temperature
Winter season transition temperature
Relative humidity lower limit in the comfort range
Relative humidity upper limit in the comfort range
Speed in the
"Dry Climate Emergency Mode"
dGto
" menu is set with the "
This menu allows you to modify the operating
parameters of the unit.
From the main menu, access the "TECH" menu
ENTER
and press the "+" key to display the "PAR" menu.
Confirm with the "Enter" key.
Select the parameter to be modified by using the
"+" or "-" keys and confirm by pressing "Enter".
ENTER
Once the parameter is selected, the value will be
displayed.
The value can be modified using the "+" or "-" keys.
tAb
tAb
"Dry Climate Emergency Mode"
POSt
" function.
RANGE DEFAULT
-10% - +10% 60 m
F130 = 130 m
-10% - 0%
F150 = 150 m
-10% - +10% 600
-10% - +10% 3000
60 - 240 min 180 min
10 - 30°C 26
10 - 30°C 20
10 - 30°C 18
10 - 30°C 24
1 - 96 96 (15 min)
20 - 30 25
40 - 50 45
1 - 4
English
3
/h
3
/h
3
/h
2
81