• SETTING THE FILTER REPLACEMENT
FREQUENCY
From the main menu, access the "TECH" menu
and press the "+" key to display the "FLIF" menu.
Press "Enter" to access the menu and display the
set filter replacement period.
The frequency is expressed in days and can be
changed within the range of variability specified
in the table.
Parameter Description
Filter service life
• SETTING THE AUTOMATIC
VENTILATION MODE
From the main menu, access the "TECH" menu
and press the "+" key to display the "AUTO" menu.
Press "Enter" to access the menu, the mode is set
by default at "OFF".
To activate it press the "+" button, select "ON" and
confirm with the "Enter" key.
F130
AUto
Parameter Name
FLIF
F150
Off
ENTER
On
Increase the period by pressing the "+" button.
Decrease the period by pressing the "
Press "ENTER" to confirm the selected setting.
Press the "
Variability Range
Flif
180
ENTER
Press the "
The Automatic mode enables operation at var-
iable flow to pursue target air quality values
with respect to the measurements made by the
sensor connected to the machine.
The machine is equipped by standard with a
humidity sensor on the return circuit and the
"AUTO" mode activates the operating logic
described in the specific section "AUTOMATIC
MODE WITH HUMIDITY SENSOR"
ENTER
ENTER
-
" key to go back to the previous menu
Default values
30 - 400
180 (about 6 months)
ENTER
-
" key to go back to the previous menu.
ATTENTION!: in case of use of the
unit with AUTO mode you are
recommended to use the T-EP
remote control to supervise the
indoor humidity.
English
-
" button.
.
77