Technical Menu - Energy SHP-130 Instrucciones Para La Instalación, El Uso Y El Mantenimiento

English

TECHNICAL MENU

"TECH"
TECH
The "
the installer or by qualified personnel.
• SETTING THE FAN AIR
FLOW RATE
Once the unit has been installed and pow-
ered, the air flow rate must be set.
Before carrying out the calibration, the fans are
set to the default flow rate.
ATTENTION: If no flow rate calibration procedure
is carried out, the machine will operate using the
default flow rate as the calibration flow rate for
both fans. The default flow rate corresponds to the
reference value with respect to EU Reg. 1253/14 and
is equal to 91 m 3 /h.
From the main menu, access the "TECH" menu
and press the "+" key to display the "TAB" menu.
To activate the required menu, press the central
ENTER key.
TAB
76
" menu must only be used by
ENTER
The display will prompt you to set the flow rate of
fan V1 (supply fan);
access the menu by pressing the central enter key;
set the project flow rate (m
"-" keys.
Press the enter key to confirm.
After confirming, it automatically switches to the air
flow rate setting of fan V2
(extraction fan):
set the project flow rate (m
"-" keys.
Press the enter key to confirm.
V1
ENTER
V2
ENTER
3
/h) using the "+" or
3
/h) using the "+" or
89
ENTER
95
ENTER