Publicidad
Idiomas disponibles
Idiomas disponibles
WW1-96
Te c h n i c a l N o t e s
By creating the Vintage WW1 (Wrist Watch 1), Bell & Ross pays tribute to the first wristwatches worn by pilots in the 1920s, a design born from the need
to keep their hands free. Drawing its inspiration from a point of evolution midway between the pocket watch and the wristwatches of the 1940s, the WW1
brings together the design elements of the Roaring Twenties: a large fob-watch type diameter, removable wire lugs welded to the sides of the watch giving
the impression of horns, and a thin leather strap, elegant yet strong.
general DeSCrIPTIOn
: Self-winding mechanical movement. Meticulous finish. 22 jewels.
Movement
28,800 vibrations per hour. Power reserve of approximately 40 hours. High-preci-
sion setting in 4 positions (tolerance of 0/+10 seconds per day).
minutes, small seconds. Large double disc date display with quick set mode. Hour
setting with seconds stopped.
Case
: 45 mm diameter . 12.8 mm Thickness.
domed anti-reflective sapphire.
Water resistance
general USe
. With the watch off (crown in position 0), wind the mechanism by turn-
Winding
ing the crown clockwise. After approximately 40 turns, the watch is fully wound
(the mechanism has no stopper in order to keep the winder from being wound too
tightly). This provides a power reserve of 40 hours. When the watch is being worn,
the clockwork winds the movement.
pull the crown out to position 1 and set the date by turning the crown counter-
clockwise. Normal date set (crown in position 2): to ensure the date changes at
midnight and not midday, set the date using the hour hands. Pull the crown out to
position 2 and turn the hands until the date changes. Then set the correct time.
setting
. Pull the crown out to position 2. The second hand is then stopped, which
allows you to set the time down to the second. Set the time by turning the crown in
the desired direction.
A
B
C
D
The Bell & rOSS InTernaTIOnal gUaranTee
Your Bell & Ross watch has successfully passed the most rigorous reliability tests in the Swiss watch-making industry. It is guaranteed against all manufacturing defects for 2 years from the date of purchase entered by the Bell & Ross
approved retailer on the international guarantee certificate subject to applicable laws and/or legal guarantees. This guarantee is total (parts and labor). It excludes however:
. Damage that is the result of accidents or improper or incorrect use of the watch (violent shock, crushing, brutal handling of the clasp).
. Damage that is the result of repairs or dismantling not carried out by an approved Bell & Ross retailer or an approved after-sales service center.
. The results of normal use and wear of the watch and strap. This also excludes batteries given the specific nature of these items.
IMPORTANT : To be covered by the Bell & Ross International Guarantee, any work must be carried out by approved specialists : retailers approved by Bell & Ross, approved after-sales service centers.
This guarantee can only be applied on presentation of the Bell & Ross International Guarantee certificate, duly completed, dated and signed by an approved retailer.
Models and Technical features subject to change
Functions
: 50 meters.
: Quick set * (crown in position 1):
Date setting
0 1 2
IMPOrTanT
. As with all mechanical watches with a date display, quick date set
*Quick date set
(crown in position 1) MUST NEVER be carried out between 21:00 (9 pm) and 3:00
: hours,
(3 am). Once the time has been set, push the crown back to position 0 to ensure
your watch is fully water-resistant. The crown must never be adjusted under water.
Crystal
:
Care
After being immersed in salt water, the watch and strap should be carefully rinsed
with fresh water. The water-resistance of the watch should be checked every two
years. In order to guarantee the brand's high service standards, any work on your
watch must be carried out by the Bell & Ross repair center or a Bell & Ross approved
watchmaker. For any repairs under warranty, you must present the Bell & Ross war-
ranty card, dated and signed by the retailer at the time of purchase.
Time
A. Minute hand
B. Hour hand
C. Second hand
D. Large date
E
E. Crown
0. Wind the mechanism manually (clockwise)
1. Set the date (turning counter-clockwise)
2. Set the time (turning clockwise or counter-clockwise)
Publicidad
