Kit Assembly - Metra 99-7354B Instrucciones De Instalación

ISO DIN head unit provisions
1. Attach the radio brackets to the
radio panel with the provided
(4) #8 x 3/8" Phillips screws.
(Figure A)
2. Mount the aftermarket radio to
the radio brackets/radio panel
assembly using the screws
supplied with the radio. (Figure B)
3. Mount the pocket into the radio
brackets/radio panel assembly
using the supplied (4) #8 x 3/8"
screws. (Figure B)
4. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS.
Re-connect the negative battery
terminal and test the unit for
proper operation.
5. Reassemble dash in reverse order
of disassembly.

Kit Assembly

(Figure A)
99-7354B
(Figure B)
3