Tabla De Contenido; Specifications; English - Hach TU5200 Manual Básico Del Usuario

Table of contents
Specifications on page 3
General information on page 4
Installation on page 9
User interface and navigation
Startup on page 11
Additional information
An expanded user manual is available on the manufacturer's website. Videos on how to install,
operate and do maintenance and troubleshooting on the TU5200 turbidimeter are available on the
TU5 Series Turbidimeters playlist at http://www.youtube.com/user/hachcompany.

Specifications

Specifications are subject to change without notice.
Specification
Measurement method
Primary compliance method EPA approved Hach Method 10258
Dimensions (W x D x H)
Weight
Enclosure
Protection class
Pollution degree
Installation category
Power requirements
Operating temperature
Storage temperature
Humidity
Display
Laser
Optical light source
Measurement units
Range
Accuracy
Linearity
1
http://www.hach.com
2
1 mNTU = 0.001 NTU
on page 10
Details
Nephelometry with the scattered light collected at a 90° angle to the incident light
and 360° around the sample vial.
41 x 28 x 12.5 cm (16 x 11 x 7.7 in.)
2.37 kg (5.23 lb)
IP20
Instrument: III; Power supply: II
2
II
Instrument: 15 VDC, 2 A; Power supply: 100 to 240 VAC, 50/60 Hz
10 to 40 °C (50 to 104 °F)
-30 to 60 °C (-22 to 140 °F)
5 to 95% relative humidity, non-condensing
17.8 mm (7 in.) color touch screen
Class 2 laser product: Contains a non user-serviceable class 2 laser.
650 nm, maximum 0.43 mW
NTU, FNU, TE/F, FTU, EBC, mg/L, mNTU
0 to 700 NTU, FNU, TE/F, FTU; 0 to 100 mg/L; 0 to 175 EBC
± 2% of reading plus 0.01 NTU from 0 to 40 NTU
± 10% of reading from 40 to 700 NTU based on Formazin primary standard at
25 °C (77 °F)
Better than 1% for 0 to 40 NTU on Formazin at 25 °C (77 °F)
Operation on page 12
Calibration on page 20
Maintenance on page 20
Troubleshooting on page 22
1
2
or mFNU
English 3