Honda EU22i Manual De Explicaciones página 42

OPERATION
4. Start the engines and make sure the output indicators (green) come
ON.
5. Confirm that the appliance to be used is switched off, and plug in
the appliance.
6. Switch on the equipment to be used.
PLUG
If the generators are overloaded (see page 41), or if there is a short
circuit in a connected appliance, the overload indicator (red) will go
ON. The overload indicator (red) will stay ON, and after about four
seconds, current to the connected appliance(s) will shut off, and the
output indicator (green) will go OFF . Stop both engines and
investigate the problem.
Determine if the cause is a short circuit in a connected appliance or an
overload. Correct the problem and restart the generator.
38
OUTPUT INDICATOR
LIGHT (GREEN)