3. Loosen the carburetor drain screw, and drain the gasoline from the
carburetor into a suitable container.
4. Remove the spark plug maintenance cover and the spark plug cap
(see page 59).
5. Turn the engine switch to the ON position.
6. Pull the starter grip 3 to 4 times to drain the gasoline from the fuel
pump into a suitable container.
7. Turn the engine switch to the OFF position securely.
8. Tighten the carburetor drain screw, and then reinstall the
maintenance cover.
9. Reinstall the spark plug cap and spark plug maintenance cover.
CARBURETOR DRAIN SCREW
ENGINE SWITCH
FUEL OFF
OFF
STORAGE
63