Bushnell TROPHY CAM 8MP HD Manual De Instrucciones página 21

The SETUP Menu – Parameters and Settings List
w/Descriptions
Parameter
Settings
(Bold=default)
Camera, Video*,
Mode
3M Pixel,
Image Size
(only affects
5M Pixel,
still photos in 8M Pixel,
Camera mode)
Image Format Full Screen, Wide
(only affects still Screen
photos-
format for video
is tied to Video
Size)
Capture 1 (photo),
Number 2 (photos),
(only affects 3 (photos)
still photos in
Camera mode)
* Only still photos can be transmitted wirelessly, due to the large files generated by video
and carrier bandwidth limitations. When the camera is set to video mode, the video files
are stored on the SD card for later review (see
Description
Selects whether still photos or video
clips are captured when the camera
is triggered.
Selects resolution for still photos
from 3 to 8 megapixels. Higher
resolution produces better quality
photos, but creates larger files
that take up more of the SD card
capacity (fills up faster). 5M is a good
compromise between quality and
file size.
Selects 4:3 (Fullscreen, like old TV
sets) or 16:9 (Widescreen, like new
flat TVs) "aspect ratio" for still photos.
If you like to view your photos on a
TV set or computer monitor, you can
set the format to match it.
Selects how many photos are taken
in sequence per trigger in Camera
mode. This setting affects photos
taken in Field Scan mode as well
(to snap two photos every 10
minutes, for example).
thumbnail image will be transmitted
wirelessly, regardless of this setting.
Please also refer to the Interval
parameter.
REVIEWING/DELETING THE PHOTOS/VIDEOS
Note: only one
, pg.34)
21