Inserting The Sd Card - Bushnell TROPHY CAM 8MP HD Manual De Instrucciones

the camera will switch to battery power). The solar panel's battery will power
the camera at night.
Note: as battery consumption is less of a concern when using the Solar Panel together
to supplement the internal batteries, Wake mode can be set (via text message) for a
quicker transition from standby (consumes more power). See pg. 30 regarding the use
of "Wake" mode vs "Eco" mode. The default Eco mode extends battery life.

Inserting the SD Card

Insert the SD card (with the camera's power switch in the OFF position)
before beginning to operate the camera. Don't insert or remove the SD card
when the power switch is in the ON position.
The WIRELESS Trophy Cam HD uses a standard SD (Secure Digital)
memory card to save photos (in .jpg format) and/or videos (in .mov format).
SD and SDHC (High Capacity) cards up to a maximum 32GB capacity are
supported. Using high speed SD cards (SanDisk
higher) is recommended if you will use the 1280x720 or 1920x1080 HD
video settings. Before inserting the SD card into the card slot after opening
the camera's front cover, please make sure that the write-protect switch
on the side of the card is "off" (NOT in the "Lock" position). The following
describes how to insert and remove the SD card:
• Insert the SD card into the card slot with its label side upwards (see
below). A "click" sound indicates that the card is installed successfully.
If the wrong side of the card is facing up, you will not be able to insert
it without force-there is only one correct way to insert cards. If the SD
card is not installed correctly, the device will not display an SD card icon
on the LCD in SETUP mode (the SD card icon displayed after switching
to SETUP mode will have a "lock" symbol inside it in it if the card is locked).
Formatting the SD card by using the WIRELESS Trophy Cam HD's
"Format" parameter before using it for the first time is recommended,
especially when a card has been used in other devices (see pg. 25,
"Format" for details).
• To take out the SD card, just gently
push in the card (do not try to pull it
out without pushing in first). The card is
released from the slot and ready to be
removed when you hear the click. WARNING:
Be sure the camera's power is switched OFF before inserting or
removing SD cards or batteries.
SDHC rated class 6 or
®
11