Bushnell TROPHY CAM 8MP HD Manual De Instrucciones página 37

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Reviewing Images on the Color LCD
• Put the power switch in SETUP mode (switch to OFF first).
• Push the MENU key twice to go to "live view" mode, then press OK.
• Use the UP/DOWN keys to scroll through your photos or videos.
A zoom feature is available for still photos: first press the LEFT
key, then use the UP/DOWN keys to zoom in or out. After
zooming in, you can then press OK, and use the UP/DOWN/
LEFT/RIGHT keys to move around and examine small details in
different areas of the photo. Press OK at anytime to exit and return to
the full view.
• Press the RIGHT (Shot) key to play a video. If "Video Sound" was set
to "On" in the Setup Menu, you should hear audio from the speaker
during playback.
• Push MENU to delete an image. Image delete mode works as
described in "Deleting Photos or Videos" (next page). To exit image
review mode, press the OK key.
Reviewing Images by Connecting the Camera to a Computer
You can always unmount the entire camera from the tree and connect its
USB port to a computer-it will be recognized as a "removable disk", without
the need to install any drivers or software. When using a PC (or Mac*) to view
photos (or video clips*), first connect the device to the computer with the
supplied USB cable. Then use commercial software with an image browser
feature, or an image browser included with the PC's operating system to
view images saved on the SD card in the folder \DCIM\100EK113 (a new
folder will be created every 1000 images). Each new image or video will be
numbered incrementally with 8 digits in order of the time it was captured-the
first 4 digits are the month and day, the last 4 digits the # of the image. For
example, you will see file names such as "09020001.JPG" or "09020001.
MOV", etc. Through the file format suffix you can distinguish whether the file
is a still photo (with suffix .JPG) or a video (with suffix .MOV).
*video files may require additional software for viewing on a Mac.
The WIRELESS Trophy Cam HD supports 3 kinds of file system formats,
FAT12, FAT16, and FAT32. The default value is FAT16 to save photos and
videos. Here are some related notes:
• You don't need to be concerned about the file system format of the
WIRELESS Trophy Cam HD unless your equipment has problems
37

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

119598

Tabla de contenido