Briggs & Stratton RE 200 Serie Manual Del Operador página 20

Lubrication
Lubricate the rider and mower as shown in Figures 11 -
16. When a grease gun is shown, wipe the fitting clean,
apply two or three shots of lithium base automotive
grease, and wipe off excess grease. When an oil can is
shown, wipe the area clean, apply a few drops of oil (SAE
30), then wipe up drips or spills.
20
Figure 11
Figure 12
Note: On 30" mower,
grease fitting is on
topside of deck.
Figure 13
Figure 14
Figure 15
Figure 16