geberit ACO 201 Instrucciones De Servicio página 21

Interval
Every year
Maintenance
Operating instructions ACO 201
Maintenance work
• Have an authorised specialist workshop check the press capacity and
the state of wear
Clean and lubricate the pressing device
WARNING
Risk of injury by switching on inadvertently
` Remove the accumulator before starting any
maintenance work on the tool
CAUTION
Damage to the device by moisture
` Never immerse the pressing device in water or other
liquids
Depress the release button on the accumulator and pull
1
out the accumulator
2 Clean the roller drive and locking pin of the pressing device
3 Use compressed air or a brush to remove dirt
Use WD-40® or equivalent to lubricate the roller drive, its
4
guide and the locking pin
EN
21