Operation And Maintenance Safety; Installation And Assembly; Fastening And Levelling The Unit - Astralpool DMX VARIABLE PUMP S Manual De Instalación, Operación Y Mantenimiento

[en]
Fountain Units
1.3

OPERATION AND MAINTENANCE SAFETY

Put up signs around the fountain in line with the country's or local regulations.
-
Examples of warnings:

"Water unsafe to drink" "Bathing is forbidden" "Risk of electric shock".

Area unfit for road traffic (with or without niche)
Do not open or handle any of the unit's components other than those for which
-
explanations given in this manual. Otherwise, the unit could lose its warranty
-
Do not handle the unit with damp or wet hands.
-
Do not handle the unit if is connected to the mains power supply.
-
The unit may only be handled by authorized personnel or qualified service
engineers. Do not allow unauthorized personnel or unqualified service engineers
to handle it.
2

INSTALLATION AND ASSEMBLY

IMPORTANT:
-
Read the whole of the manual carefully before installing the unit.
-
Check that it is in a good state of repair on removing the packaging.
-
Identify all the components prior to their installation.
Avoiding warnings on this user's guide can lead to improper handling and
-
brakeage of the unit, so the product will lose its warranty.
2.1

FASTENING AND LEVELLING THE UNIT

Place the equipment so that the water level of the fountain is at least 20 cm above
the top point of the pump (②).
Components required for unit installation:
1) Fasten and level the unit to anchors using nuts. Use the second nut to block the
first nut in order to avoid untightening due to unit vibrations.
14
INSTALLATION, OPERATION AND MAINTENANCE MANUAL; DMX VARIABLE PUMP S