The Maxi-Cosi Car Seat - Mutsy EVO Manual De Instrucciones

Place the Safe2go car seat
· Orientate the Safe2go car seat such that it is directed rearwards on the
frame.
· Hold the Safe2go car seat with the central hinge points of the support
bar directly above the adapters.
· Lower the Safe2go car seat and press solidly into the adapters until you
hear a click.
· Check that the Safe2go car seat has been placed horizontally and has
been attached properly by trying to lift it from the frame.
Remove the Safe2go car seat
· Press the buttons on both adapters to unlock the Safe2go car seat.
· Lift the Safe2go car seat straight up from the frame.
Remove the Safe2go adapters (z1)
· Pull the unlock buttons on the inside of the adapters upwards and ver-
tically remove the adapters from the attachment points.
Maxi-Cosi car seat
· The Maxi-Cosi car seat adapters are suitable for use with the following
Maxi-Cosi group 0+ car seats: Maxi-Cosi Pebbles, Maxi-Cosi Cabriofix,
Maxi-Cosi Citi.
· Always observe the instructions in the manual of your Maxi-Cosi car
seat before you start using the car seat.
· Make sure that the frame has fully been unfolded and the brake blocked
during all actions indicated below.
Place the Maxi-Cosi adapters on the frame
· There are two foldable attachment points on both sides of the frame.
Make sure that the attachment points are in a vertical position.
· The adapter marked with 'R' is placed on the right side of the frame, the
adapter marked 'L' is placed on the left side.
· Slide the adapters in the attachment parts and press solidly until you
hear a click.
Place the Maxi-Cosi car seat on the adapters
· Orientate the Maxi-Cosi car seat such that it is directed rearwards on
the frame.
· Hold the Maxi-Cosi car seat with the central hinge points of the support
bar directly above the adapters.
· Lower the Maxi-Cosi car seat and press solidly into the adapters until
you hear a click.
EN
25