The Maxi-Cosi Car Seat - Mutsy i2 Manual Del Usuario

blocked during all actions indicated below.
Installing the Safe2go adapters to the frame (x1)
· The adapter marked with 'R' is placed on the right side of the chassis,
the adapter marked 'L' is placed on the left side.
· Slide the adapters in the attachment parts and press solidly until you hear
a click. Check the adapters by trying to remove them from the chassis.
Place the Safe2go car seat
· Orientate the Safe2go car seat such that it is directed rearwards on the
chassis. Hold the Safe2go car seat with the central hinge points of the
support bar directly above the adapters. Lower the Safe2go car seat
and press solidly into the adapters until you hear a click. Check that the
Safe2go car seat has been placed horizontally and has been attached
properly by trying to lift it from the chassis.
Remove the Safe2go car seat
· Press the buttons on both adapters to unlock the Safe2go car seat.
· Lift the Safe2go car seat straight up from the chassis.
Remove the Safe2go adapters
· Slide the unlocking button on the chassis attachment points upwards
until you hear a click. The adapter can now be taken off the chassis.
Maxi-Cosi car seat
· The Maxi-Cosi car seat adapters are suitable for use with the following
Maxi-Cosi group 0+ car seats: Maxi-Cosi Pebbles, Maxi-Cosi Cabriofix,
Maxi-Cosi Citi.
· Always observe the instructions in the manual of your Maxi-Cosi car
seat before you start using the car seat.
· Make sure that the chassis has fully been unfolded and the brake
blocked during all actions indicated below.
Place the Maxi-Cosi adapters on the chassis (x3)
· The adapter marked with 'R' is placed on the right side of the chassis,
the adapter marked 'L' is placed on the left side.
· Slide the adapters in the attachment parts and press solidly until you
hear a click.
Place the Maxi-Cosi car seat on the adapters
· Orientate the Maxi-Cosi car seat such that it is directed rearwards on
the chassis.
31