Applying The Arm Cuff - Braun ExactFit 3 Manual Del Usuario

• Do not inflate the monitor's cuff when it is not wrapped around the arm.
• Do not attempt to disassemble or change any parts of the monitor including the cuff.
• Do not drop the product or put it through strong impact.
• The device is not supposed to be used if your arm has any wound or injury.
Choosing the Right Cuff
For accurate measurement, it is important to choose the correct size cuff which best fits your upper
arm. Choose the cuff size according to your arm circumference and make sure the bottom of the cuff is
2~3cm above your elbow.
• Small/Medium Cuff = 22~32cm arm circumference
• Large/XLarge Cuff = 32~42cm arm circumference

Applying the arm cuff

1. Slide the end of arm cuff furthest from the tube through the metal ring to a loop.
The smooth cloth should be on the inside of the cuff.
Pile side material
Velcro
Smooth
cloth
Metal ring
Fig. 4 Fig. 5
2. If the cuff is located correctly, the velcro will be on the outside of the cuff and the metal ring will
not touch the skin (Fig. 4).
3. Put your left arm through the cuff loop. The bottom of the cuff should be approximately (2~3 cm)
above elbow. The tube should lie over the brachial artery on the inside of the arm (Fig. 5).
OK OK
Fig. 7 Fig. 8
4. Pull the cuff so that the top and bottom edges are tightened around your arm (Fig. 6).
5. When the cuff is positioned properly, press the Velcro firmly against the pile side of the cuff.
6. This cuff is suitable for use if the <<index>> mark falls within the <<ok range>> marked by two
arrows when the cuff is tightened around your arm (Fig. 7).
7. Sit on a chair and place your arm on the table so that the cuff is at the same level as your heart
(Fig. 8).
6
Left arm
Main
arteries
Fig. 6
Display BP6000 / BP6100 and BP6200
Hour
Month
D M
Date
Inflation sign
Deflation sign
Irregular heart beat
symbol*
Morning
hypertension*
Heart rate symbol
User A/ user B
A B
symbol
Average symbol
Morning average record*
Evening average record*
* For BP6200 only
Note: On BP6200, the backlight goes on when the unit is turned on and it will remain on until the
device will be switched off.
Minute
Ante or Post Meridiem
A Low battery indicator
P
Measuring error display
WHO indicator
Memory record
7