Other Functions - Samsung SCC-C6323P Manual Del Usuario

• Run Pattern
Method 1) <Run Pattern> [Pattern NO.]
ex) Run Pattern 2 : <Run Pattern> [2]
Method 2) <Go Preset> [Pattern NO.+130]
ex) Run Pattern 2: <Go Preset> [132]
• Delete Pattern
Use OSD menu to delete a Pattern.
When the pattern is saved or executed, the PAN/TILT
is operated with Auto Flip OFF mode.
SCAN
• Function
The Scan function allows running sequence of Presets,
Patterns and/or Auto Pans. Max 8 Scan can be stored.
Each Scan can have max 20 action entities which
can be preset, pattern or Auto Pan. Dwell time means
the time interval between actions and is adjustable in
the menu. Besides, there is an option number with
which Preset speed as well as the repetition number of
Pattern and Auto Pan can be set up.
Dwell Time
Preset 1 Pattern 5
Max 20 entities
• Set Scan
Use OSD Menu to create a Scan .
• Run Scan
Method1) <Run Scan> [Scan No.]
ex) Run Scan 2 : <Run Scan> [2]
Method2) <Run Preset> [Scan No.+150]
ex) Run Scan 2 : <Run Preset> [152]
• Delete Scan
Use OSD Menu to delete.
SCHEDULE
• Function
The Schedule function allows running an appropriate
function like Preset, Auto Pan, Pattern, Scan, Home
move at designated day and time. For example, if you
setup a rule Tuesday at 9:00AM and Preset 1 (say
Main Gate), the camera will move to main gate every
Tuesday at 9:00AM. If you choose Weekday, camera
will move to Main gate everyday except weekend.
It is noted that due to the real time clock, the time data
will be kept regardless of blackout. The initial time and
day setup is essential to proper Schedule function.
• Set Schedule
Use OSD Menu to create a Schedule
• Run Schedule
Use OSD Menu of Schedule Master Enable
• Delete Schedule
Use OSD Menu to delete.

OTHER FUNCTIONS

• Preset Lock
This function is made to protect preset data from
unauthorized overwriting. If Preset Lock is ON,
Preset save command using Hot Key is disabled
while Preset save using OSD Menu is acceptable.
• Power Up Action
This function enables to resume the last action
executed before power down. Most of actions such
Auto Pan 5
as Preset, Pattern, Auto Pan and Scan are available
for this function but Jog actions are not available to
resume.
• Auto Flip
In case that tilt angle arrives at the top of tilt orbit
(90°), zoom module camera keep moving to opposite
tilt direction (180°) to keep tracing targets. As soon
as zoom module camera passes through the top
of tilt direction (90°), images should be reversed
automatically and F appears in screen. If this
function is set to OFF, tilt movement range is 0 ~ 90°.
• Parking Action
This function enables to locate the camera to specifi c
position automatically if operator doesn't operate the
controller for a while. The Park Time can be defi ned
as an interval from 1 minute to 4 hours.
• Alarm Input
2 Alarm Inputs are used. If an external sensor
is activated, camera can be set to move to
corresponding preset position. It is noted that the
latest alarm input is effective if multiple sensors are
activated.
Operation
English – 23