Auto Pan Setup - Samsung SCC-C6323P Manual Del Usuario

❖
Edit Preset Label
LABEL - PRESET 1
[█
----------
1234567890
ABCDEFGHIJ
KLMNOPQRST
UVWXYZabcd
efghijklmn
opqrstuvwx
yz<>-/:.
----------
① Edits label to show on monitor when camera
arrives at presets. In Edit Label menu, a reverse
rectangular is cursor. As soon as fi nishing
selecting alphabet, cursor moves to the next digit.
[█
Current Cursor Position
② Using Left/Right/Up/Down of joystick, move to
an appropriate character from the Character set.
To choose that character, press the NEAR or
ENTER key.
----------
1234567890
ABCDEFGHIJ
KLMNOPQRST
UVWXYZabcd
efghijklmn
opqrstuvwx
yz<>-/:.
----------
Space Char.
If you want to use blank, choose Space
character (" "). If you want to delete a character
before, use back space character (" ").
③ If you complete the Label editing, move cursor
to "OK" and press NEAR or ENTER key to save
completed label. To abort current change, move
cursor to "Cancel" and press NEAR or ENTER
key.
How to use OSD Menu
]
OK
CANCEL
]
Back Space Char.

AUTO PAN SETUP

AUTO PAN SETUP
APAN NO.
1ST POS.
2ND POS.
APAN SPEED
CLEAR APAN
BACK
EXIT
• APAN Number
Selects Auto Pan number to edit. If a selected Auto
Pan has not defi ned, "NOT USED" is displayed in 1st
Position and 2nd Position
• 1ST POSITION
• 2ND POSITION
Set up the 2 position for Auto Pan function. If a
selected preset is not defi ned, "UNDEFINED" will be
displayed as shown below.
AUTO PAN SETUP
APAN NO.
1ST POS.
2ND POS.
When Auto Pan function runs, camera moves
from the preset assigned as the 1st point to the
preset assigned as the 2nd point in CW (Clockwise)
direction. Then camera moves from the preset
assigned as the 2nd point to the preset assigned as
the 1st point in CCW (Counterclockwise) direction.
In case that the preset assigned as the 1st point
is same as the preset assigned as the 2nd point,
camera turns on its axis by 360° in CW direction and
then it turns on its axis by 360° in CCW direction.
• APAN SPEED [1°/sec ~180°/sec]
Sets Auto Pan speed from 1°/sec to 180°/sec.
• CLEAR APAN [CANCEL/OK]
Deletes current Auto Pan data.
1
NOT USED
NOT USED
30/SEC
CANCEL
[1~8]
[PRESET 1~128]
1
PRESET5
NOT USED
UNDEFINED
English – 29