Abicor Binzel Robo Instructivo De Servicio página 14

Translation of the original operating instructions
EN Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these Operation Instructions which may become necessary due to misprints,
inaccuracies or improvements to the product. Such changes will however be incorporated into
subsequent editions of the Instructions. All trademarks mentioned in the operating instructions are
the property of their respective owners.
1 Identification
1.1 EU Declaration of Conformity
1.2 Responsibilities of the user
2 Product description
2.1 Designated use
2.2 Use contrary to the designated use EN-4
2.3 Technical Data
3 Safety instructions
3.1 Classification
4 Scope of delivery
4.1 Transport
4.2 Storage
5 Functional Description
5.1 Assembly description
5.1.1 2/2 directional valve
5.1.2 Injection oiler/signal generator/
adjusting sleeve
5.1.3 Oil repository
5.1.4 Mounting bracket
EN - 2
EN-3 6 Installation
EN-3 6.1 Installation
EN-3 6.2 Pneumatic connection
6.3 Electrical connection
EN-4
EN-4 7 Putting into operation
EN-4 8 Putting out of operation
9 Maintenance and cleaning EN-10
EN-5
EN-5
10 Troubleshooting
EN-6
EN-6 11 Dismounting
EN-6
12 Disposal
EN-6 12.1 Materials
EN-7 12.2 Consumables
EN-7 12.3 Packaging
EN-7
EN-8
EN-8
Air-blast and injection unit
EN-9
EN-9
EN-9
EN-9
EN-10
EN-10
EN-11
EN-11
EN-12
EN-12
EN-12
EN-12